DSP 500 YS

Engine Driven Welder Diesel YANMAR 4TNV88 - Three-phase asynchronous Alternator - Water cooling

WELDING

  • Welding current: 20A ÷ 500A
  • Welding current electronic regulation: continues on 2 scales: 20A ÷ 250A / 20A ÷ 500A
  • Service: 500A - 60% / 450A - 100%
  • Open circuit voltage (no-load voltage): 62 Vdc (65 Vdc peak)

POWER RATINGS
  • Three-phase power: 16 kVA / 400 V / 23.1 A
  • Single-phase power: 10 kVA / 230 V / 43.5 A

GENERAL SPECIFICATION
  • Tank capacity: 60 l
  • Running time (welder 60%): 19 h
  • Measured acoustic power LwA (pressure LpA): 94 dB(A) (69 dB(A) @ 7 m)
  • Guaranteed acoustic power LwA (pressure LpA): 95 dB(A) (70 dB(A) @ 7 m)
  • Weight: 720 Kg
  • Dimensions max. on base Lxlxh:  1720x850x1128 mm

More Information

Engine

Model Fuel Starter Output Cylinders / Displacement Speed Cooled
YANMAR 4TNV88 Diesel Electric 18 kW (24.5 hp) 4/ 2.19 lit. 1500 rpm Water

ENGINE PROTECTION LOVATO

sample powersafe
The Lovato RGK420SA control unit has an ignition key and push buttons for controlling the engine. A wide LCD display allows the visualization of alarms and the monitoring of machine parameters. The main features are:

  • User interface with symbols, codes and texts.
  • Setpoints adjustable via controller buttons or PC
  • Remote Start and Stop
  • Configurable inputs and outputs
  • NFC interface for wireless programming

DOWNLOAD MANUAL



DSP Program

sample powersafe TECHNOLOGY

The acronym DSP, which is referred to this line of MOSA welders, stands for "Digital Signal Processor", and identifies the fact that the regulation of the welding parameters is performed by means of a digital technique. More precisely, in the DSP controller reside the programs which perform the regulation of the different welding processes supported.

The implementation of the control is accomplished by a power converter of the "Chopper" type (Chopper System), which operates at high frequency (20 kHz).

The high frequency conversion allows to obtain superior welding performances in comparison with more conventional techniques at low frequency.

FEATURES

Via a rotary selector you can choose between 5 different welding programs.

  1. LIFT ARC TIG – This program performs  a TIG welding with a "Lift Arc" start. With this feature the arc is started simply by touching the piece, without scratch.
  2. STICK (3 PROGRAMS) - They are specific for the electrode welding (CC), being characterized by three different arc force levels with increasing short circuit current from 1 to 3.
  3. MIG MAG – It is dedicated to WIRE welding, WITH GAS or FLUX CORED. This welding process is performed at constant voltage (CV).

The front panel of the DSP control unit is provided with a military type circular connector which can be connected to a MOSA remote control unit or wire feeder, for MIG MAG. When plugging an external connector the control is automatically switched from the front panel knob to the knob on the remote unit. All the machines of this series are equipped with digital meters to monitor the welding current and voltage. The software of the control unit, depending on the version of welder on which it is installed, can handle various functions, including:

a) Power Optimizer - A function that prevents overloading of the engine during welding
b) VRD - (Voltage Reduction Device) a function that reduces the open circuit voltage to a safe value when  not welding
c) Reverse polarity – In the models where this function is present , a switch on the panel commands the contactor which implements the polarity reversal.

The DSP controller also implements some security features:
  • Chopper converter overtemperature
  • Overcurrent during welding (due to failure or malfunction)
  • Current sensor not connected
  • Malfunction of the supply voltage

OPTIONS ON REQUEST