GE 20 PS SX

Generator Diesel PERKINS 404A-22G1 - Three-phase synchronous alternator - Three-phase power 20 kVA (16 kW) - Single-phase power 7 kVA - Water Cooled

MOSA model GE 20 PS SX is a super silenced diesel generating set. The machine construction incorporates an integral roll bar, central lifting point, forklift pockets and rear canopy section that is hinged to provide full access to the engine for maintenance. The 100 litre fuel tank provides a running time of 25 hours. At 800kg the machine is compact and easily transportable using the optional site tow, road tow trailer or a special galvanized skid base frame.

This attention to detail can also be seen in the rounded edges of the canopy designed for rainwater drainage away from the control panel.

The bunded base must ensure the containment of fluids in the engine and fuel tank in the event of any loss, to prevent their dispersion in the environment.

When the Compound System is combined with a double control AVR the Compound System overrides the AVR when a heavy load is applied and also provides a backup voltage regulation in the event of AVR failure. The control panel houses the sockets and machine controls including circuit breaker and engine protection device.

EAS
models are pre-wired to accept the optional MOSA EAS Automatic Start-Up Panel which plugs into the front panel of the Generator and enables the machine to be used as an emergency standby power unit in the event of power failure from the mains supply.

Also available is an optional TCM remote control allowing start/stop of the engine up to 10 metres distance from the machine.

Suitable for a wide range of uses including industrial sites, residential, construction, noise sensitive environments and emergency standby power.

In according with CE regulation

More Information

Engine

Model Fuel Starter Output Stand By Output PRP Cylinders / Displacement Speed Cooled
Perkins 404A-22G1 Diesel Electric 20.3 kW (27.6 HP) 18.4 kW (25 HP) 4 / 2216 cm³ 1500 rpm Water

Technical Features

INFO
  • Engine protection EP6
  • Automatic voltage regulator “AVR
  • Sockets : 1x400V 32A 3P+N+T CEE - 1x400V 16A 3P+N+T CEE - 2x230V 16A 2P+T CEE
  • Emergency stop button
  • Bunded base
  • Ready for connection to automatic transfer unit EAS

GENERAL
  • IP protection degree: 44
  • Dimension: 1835x900x1265 mm
  • Dry weight : 800 kg
  • Measured acoustic power LwA (pressure LpA): 85 dB(A) (60 dB(A) @ 7m)
  • Guaranteed acoustic power LwA (pressure LpA): 85 dB(A) (60 dB(A) @ 7m)

AVR

sample powersafe The Automatic Vcoltage Regulator (AVR) is an electronic device that regulates the voltage level at all times to maintain precise AC output from the generating set. The AVR calculates how much voltage has to be sent to the exciter numerous times a second, therefore stabilising the output voltage to a predetermined set point.

The control characteristics of an AVR system are much more accurate than those of self-regulated alternators.

OPTIONS ON REQUEST